A. Rivet Nut
Previous slide
Next slide
A01-ROUND HEAD RIVET NUT
- OPEN END OR CLOSE END ROUND RIEVET NUT
- MATERIAL: C1006/C1008 OR ALUMINIUM OR SUS304(A2)
- CAPABILITY:M3~M10 METRIC OR 1/4~1/2 INCH
- Detailed introduction
A02-SPLIT LEGS RIVET NUT
- Split legs rivet nut are ideal for use with thin sheet materialsand hollow sections where high pull-out forces are required.
- MATERIAL: STEEL C1006/C1008 OR SUS304 (A2)
- Detailed introduction
A03-HEX BODY RIVET NUT
- LARGE HEAD HEXAGON BODY RIVET NUT
- MATERIAL: C1006/C1008 OR STAINLESS STEEL (SUS304)
- CAPABILITY:M3~M10 METRIC OR 1/4~1/2 INCH
- Detailed introduction
![C. Nut and Bushing](https://www.aac-fas.com/wp-content/uploads/2021/01/C-NUT-封面-底圖.png)
![self tapping](https://www.aac-fas.com/wp-content/uploads/2021/01/自攻合集-底圖.png)
![A. Rivet Nut](https://www.aac-fas.com/wp-content/uploads/2021/01/拉帽合集底圖.png)
![OEM Sepecial Parts](https://www.aac-fas.com/wp-content/uploads/2021/01/客製化合集底圖.png)
![D. Stamping parts](https://www.aac-fas.com/wp-content/uploads/2021/01/封圖-底圖.png)
![Electronic and Tiny screw](https://www.aac-fas.com/wp-content/uploads/2021/01/超小螺絲合集底圖.png)
![DIN ISO -Standard Screw](https://www.aac-fas.com/wp-content/uploads/2021/01/標準螺絲合集底圖.png)